- Home
- About Us
- Products
- Solution
- Project
- FAQ
- News
- Contact Us
 |
Product Overview：
Infrared sensor pedestrian sign are consist of infrared sensor, wireless receiver and transmitter, and pedestrian sign with build-in Li-ion battery. It can charge by solar panel and easy to install without laying cable.
This item usually installed beside the zebra crossing, at the entrance of the zebra to form a sensor area. When pedestrians pass through, the wireless transmitter emits a signal. The flashing light from both sides of the road starts flash in order to warn the drivers to slow down.
Features:
*Intelligence:Start flashing when the pedestrians are passing through,
in order to warn the drivers to give way.
*Energy conservation and environmental protection: Solar powered, LED lighting
*Easy installation:No additional cable laying, using waterproof connector
*Stable Performance : Controlled by internal integrated circuit
Specification:
Shell Material ：Painting Metal Plate box
Reflective sheet ：3M engineering grade
Li-ion Battery ：11V/4.4AH or custom made
Solar Panel ：15V/5W or custom made
Power: ≤2W
Flashing Frequency: 40times / min or custom made
Duty Ratio ：1:3
Visibility ：≥800 m
Sensing Distance：≤6m
Sensing Angle: Horizontal 110 °, vertical 60 °
Transmission Frequency:433MHz or 315MHz
Receiving Distance ：≥50M（wide）
Working temperature：-20℃ ~ 55℃
Working Humidity:≤90%
LED Life ：100000 hours
LED Color ：yellow/red or other color
LED Quantity ：60pcs or custom made
Metal Plate Box Size: 600*300*75mm
Pedestrian Sign Size: 600*600*2.0mm
Working time:work 120 hours after full charged
Two Infrared sensor pedestrian signs configured as a pair, and are installed on both sides of the road at the entrance to the zebra crossing. Sensing probe should above the ground about 2M. Adjust the angle point at the crossing entrance to form a sensing area of 3m * 2m. As long as pedestrians or animals through the sensitive area, on both sides of the flashing light will start blinking to warn passing vehicles slow down.
Wire connection:
Product Overview：
Infrared sensor pedestrian sign are consist of infrared sensor, wireless receiver and transmitter, and pedestrian sign with build-in Li-ion battery. It can charge by solar panel and easy to install without laying cable.
This item usually installed beside the zebra crossing, at the entrance of the zebra to form a sensor area. When pedestrians pass through, the wireless transmitter emits a signal. The flashing light from both sides of the road starts flash in order to warn the drivers to slow down.
Features:
*Intelligence:Start flashing when the pedestrians are passing through,
in order to warn the drivers to give way.
*Energy conservation and environmental protection: Solar powered, LED lighting
*Easy installation:No additional cable laying, using waterproof connector
*Stable Performance : Controlled by internal integrated circuit
Specification:
Shell Material ：Painting Metal Plate box
Reflective sheet ：3M engineering grade
Li-ion Battery ：11V/4.4AH or custom made
Solar Panel ：15V/5W or custom made
Power: ≤2W
Flashing Frequency: 40times / min or custom made
Duty Ratio ：1:3
Visibility ：≥800 m
Sensing Distance：≤6m
Sensing Angle: Horizontal 110 °, vertical 60 °
Transmission Frequency:433MHz or 315MHz
Receiving Distance ：≥50M（wide）
Working temperature：-20℃ ~ 55℃
Working Humidity:≤90%
LED Life ：100000 hours
LED Color ：yellow/red or other color
LED Quantity ：60pcs or custom made
Metal Plate Box Size: 600*300*75mm
Pedestrian Sign Size: 600*600*2.0mm
Working time:work 120 hours after full charged
Two Infrared sensor pedestrian signs configured as a pair, and are installed on both sides of the road at the entrance to the zebra crossing. Sensing probe should above the ground about 2M. Adjust the angle point at the crossing entrance to form a sensing area of 3m * 2m. As long as pedestrians or animals through the sensitive area, on both sides of the flashing light will start blinking to warn passing vehicles slow down.
Wire connection:
